Hear Back PRO 6.5.3

Hear Technologies ❘ Freeware ❘
iOS
out of 3 votes

Report a Problem

The Control Hear Back PRO Mixers offer a seamless experience through the integration of the PRO Hub with a wireless network. Users can enhance their audio management with several sophisticated features.

Key functionalities include:

Connect the HBUS IN port, situated at the rear of the PRO Hub, to the gigabit-speed LAN port on your wireless access point. Upon launching the app, the mixers will automatically populate in the device list.
Personalize your input sources and toggle between mono and stereo pairs according to preference.
Swipe right on a Mixer in the app to rename it for easier identification.
Swipe left on a Mixer to access additional options, which include:
- Sending a mix to another Mixer
- Resetting the current Mix
- Adjusting LED brightness
- Disabling specific knobs, buttons, and features of the Mixer
Organize Mixers into groups by dragging and dropping them in the list, enabling mirrored functionality across grouped Mixers.
If operating on v5 firmware, customize knob functionalities by tapping the knob’s label and selecting from input channels or submixes.
Create submixes by combining up to 16 input channels and assign your submix to a dedicated knob for streamlined control.

Please note:

Minimum firmware requirements are as follows:
- Hub: v2.3 (available for download at www.hearback.com/downloads)
- Mixer: v2.14 (demonstrated at https://youtu.be/V9uKnRFa4SE)
If your current Mixer firmware is below v2.14, please reach out to Hear Technologies to request a firmware update card.
- Phone: +1 (256) 922-1200 ext 135
- Email: [email protected]

Overview

Hear Back PRO is a Freeware software in the category System Utilities developed by Hear Technologies.

The latest version of Hear Back PRO is 6.5.3, released on 01/09/2025. It was initially added to our database on 01/09/2025.

Hear Back PRO runs on the following operating systems: iOS.

Users of Hear Back PRO gave it a rating of 5 out of 5 stars.

FAQ

What is Hear Back PRO?

Hear Back PRO is a personal monitoring system designed specifically for musicians and audio professionals, allowing them to create personalized mixes using wireless technology.

How many channels does the Hear Back PRO system support?

The Hear Back PRO system supports up to 8 channels of audio, allowing users to mix their own individual monitor mixes.

Is the Hear Back PRO easy to set up?

Yes, the Hear Back PRO is designed for easy setup, with plug-and-play functionality that allows users to quickly connect and start using the system.

Can I use Hear Back PRO with existing audio equipment?

Yes, Hear Back PRO can be integrated with various audio interfaces and mixers, making it compatible with most existing professional audio setups.

What type of wireless technology does Hear Back PRO use?

Hear Back PRO operates on a digital wireless transmission system that provides a reliable connection without interference.

How long does the battery last on the Hear Back PRO receivers?

The battery life for Hear Back PRO receivers can last up to 10 hours, depending on usage and settings.

Can I connect multiple receivers to a single transmitter?

Yes, you can connect multiple receivers to a single transmitter, allowing multiple users to share the same audio feed.

Is there any latency in the output from Hear Back PRO?

Hear Back PRO is designed to have minimal latency, ensuring real-time monitoring without noticeable delay.

What is the range of the wireless signal for Hear Back PRO?

The wireless range of the Hear Back PRO system is typically up to 300 feet (90 meters) in open areas, depending on environmental factors.

Where can I purchase Hear Back PRO?

Hear Back PRO can be purchased through authorized dealers, musical instrument stores, and online platforms such as Amazon and the Hear Technologies website.

Screenshots (Click to view larger)

Burn In Lab - Get better sound from your headphones

Unlock the Full Potential of Your Headphones with Burn In Lab

DynaMount

The control application designed for the DynaMount remote microphone positioners offers a comprehensive interface for managing the devices efficiently.

HearBetter Amplification

The HearBetter Amplification application enables users to assess their hearing capabilities and offers customized sound amplification through connected headphones.

HearingAble

This application is essential to fully utilize the capabilities of the IRIS 20 products. Designed to operate via Bluetooth technology, the app allows remote access to numerous features of the IRIS 20 devices from mobile phones.

isuniYe

This application is designed for users of isuniYe hearing aid devices, providing essential management tools. It enables users to establish a connection with their isuniYe hearing aids and offers functionalities such as adjusting gain …

LoopBuds

The OTOjOY LoopBuds offer a reliable solution for users seeking access to sound from any hearing loop system worldwide. By connecting the LoopBuds to your smartphone and launching the dedicated app, you can experience high-quality audio …

Latest Version
6.5.3

Secure and free downloads checked by UpdateStar

Stay up-to-date
with UpdateStar freeware.

Latest Reviews

	LBTool Streamline Your Workflow with LBTool
	Forza Horizon Experience the ultimate open-world racing adventure with Forza Horizon!
	Tenorshare 4DDiG Recover Lost Data Easily with Tenorshare 4DDiG!
	AhnLab Safe Transaction Protect your online transactions with AhnLab Safe Transaction!
	PHP PHP: A Versatile Powerhouse for Web Development
	Google Chrome Fast and Versatile Web Browser

Most Popular Downloads

	UpdateStar Premium Edition Keeping Your Software Updated Has Never Been Easier with UpdateStar Premium Edition!
	Google Chrome Fast and Versatile Web Browser
	Microsoft Edge A New Standard in Web Browsing
	Microsoft OneDrive Streamline Your File Management with Microsoft OneDrive
	Microsoft Visual C++ 2015 Redistributable Package Boost your system performance with Microsoft Visual C++ 2015 Redistributable Package!
	Microsoft Visual C++ 2010 Redistributable Essential Component for Running Visual C++ Applications